Just an update to keep from neglecting this blog. I'm still working on the patched rear quarter. I've been grinding down the welds a little at a time so as to not heat up the panel and possibly warp it. There are still some pinholes in the welds that I'll have to fill. I've been welding them closed a few at a time. One thing I need to address is a slight dent in the rear quarter. It's not on the patch I welded in place, but it is in a difficult area to reach. I'm going to have to cut out some of the inner fender so I can reach it to hold a dolly against it. I tried doing it from the top but there was no way I could hold the dolly and slap the panel, and be able to see what I was doing. So I'll cut out a little of the inner fender and weld it back in place when I'm done.
No pictures to post today, perhaps next time.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment